Siemens, SIPLUS extreme, 6AG1193-6BP00-7BD0, N/A (I/O BaseUnit), 1-Phase, Up to 230 V AC / 120 V DC (System & Load)

Price 30000.0 INR/ Piece

Get a Price/Quote

MOQ : 1 Piece

Siemens, SIPLUS extreme, 6AG1193-6BP00-7BD0, N/A (I/O BaseUnit), 1-Phase, Up to 230 V AC / 120 V DC (System & Load) Specification

Automation Grade
Severe climate industrial automation grade

Sensor Type
Suitable for multi-wire process components

Connectivity Type
12 Process Push-in terminals

Warranty
Manufacturer standard warranty

Remote Control
Yes

Speed Range
High-speed backplane integration bus lines

Mounting Type
Standard DIN Rail Mounting installation

Control Type
Parameterized configuration via TIA Portal

Application
Station hardware module terminal block layout

Processor Type
N/A (Passive electromechanical terminal base)

Frequency
50 Hertz (HZ)

Features
Without AUX terminals, bridged to the left

Weight
0.050 Kilograms (kg)

Phase
N/A (Single-tier network layout configuration)

IP Rating
IP20 system standard compatibility

Usage
Severe climate distributed I/O control panels

Material
Plastic / Conformal Coating (Medially Resilient)

Power
10 Ampere (amp)

Size
3.5

Temperature
-40 C to 70 C Celsius (oC)

Voltage
24 Volt (v)

Product Type
SIPLUS BaseUnit BU20-P12+A0+0B (BU Type D0)

Color
Gray (Standard Siemens automation profile)

Length
11.7 Centimeter (cm)

Width
2.0 Centimeter (cm)

Siemens, SIPLUS extreme, 6AG1193-6BP00-7BD0, N/A (I/O BaseUnit), 1-Phase, Up to 230 V AC / 120 V DC (System & Load) Trade Information

Minimum Order Quantity
1 Piece

Delivery Time
2 Week

Siemens, SIPLUS extreme, 6AG1193-6BP00-7BD0, N/A (I/O BaseUnit), 1-Phase, Up to 230 V AC / 120 V DC (System & Load) About

This Siemens SIPLUS extreme I/O termination BaseUnit, model number 6AG1193-6BP00-7BD0 (BU20-P12+A0+0B), is a type D0 terminal block module engineered to host decentralized peripheral expansion cards (typically specialized high-voltage AC or process modules) under severe climate layouts. Operating on a standard 1-phase system setup, it accommodates up to 230 V AC or 120 V DC across its power distribution rails. Because it serves exclusively as a passive physical backplane connection point and push-in terminal strip rather than an active motor drive, it carries no standalone mechanical kW/HP power rating. Engineered from the core SIMATIC 6ES7193-6BP00-0BD0 hardware configuration, it features a specialized protective conformal coating to safely manage operations across extended temperature climates ranging from -40 C to +70 C. The 20 mm wide housing features 12 process terminals, operates without auxiliary (AUX) terminals, and is configured to continue the potential group bridged from the left.

Tell us about your requirement