Siemens, SIMOTICS S-1FL2 1FL2310-0AC11-0MB0, 2.5 kW, 3-Phase, 400 V Specification
- Rated Voltage
- 400 V AC Ampere (A)
- Bearing Type
- Permanently lubricated deep-groove bearings
- Torque
- Rated: 11.90 Nm / Static (M ): 12.60 Nm N-m
- Starting Type
- Frequency inverter controlled (SINAMICS S200)
- Ambient Temperature
- -15 C to +40 C Celsius (oC)
- Current Type
- Alternating Current (AC)
- Rated Frequency
- 50 / 60 Hertz (HZ)
- Cooling Method
- Natural cooling (surface air dissipation)
- Features
- With integrated 24V holding brake
- Efficacy
- High-efficiency permanent-magnet design
- Noise Level
- Low-noise industrial range db
- Standard
- CE / cURus / EAC / RoHS Standards
- Voltage
- 380 V ... 480 V AC drive grid spectrum Volt (v)
- Output Power
- 2500 W (2.5 kW) at rated speed Watt (w)
- Frequency (MHz)
- N/A (Main grid: 50/60 Hz AC input) Hertz (HZ)
- Speed
- Rated: 2000 rpm / Max: 3000 rpm RPM
- Usage & Applications
- Packaging, material handling, CNC automation
- Color
- Anthracite Gray (RAL 7016)
- Operating Temperature
- Class 155 (F) Thermal Insulation Limit Fahrenheit (oF)
- Cable Type
- Metal Angular Connector
- Dimension (L*W*H)
- Box: 49.5 x 36.9 x 33.5 cm Centimeter (cm)
- Weight
- 21.40 Kilograms (kg)
- Warranty
- Standard Siemens Industrial Warranty
- Display Type
- N/A (Handled via Drive interface)
- Frequency
- Drive frequency controlled profiles Hertz (HZ)
- Material
- Heavy-duty industrial housing
- Conductor
- High-conductivity copper windings
- Rated Current
- 7.8 A (Static current: 7.8 A) Ampere (amp)
- Shaft Diameter
- Plain Shaft D3.5 x 8.0 Centimeter (cm)
- Mounting Type
- IM B5 Flange Configuration
Siemens, SIMOTICS S-1FL2 1FL2310-0AC11-0MB0, 2.5 kW, 3-Phase, 400 V Trade Information
- Minimum Order Quantity
- 1 Piece
Siemens, SIMOTICS S-1FL2 1FL2310-0AC11-0MB0, 2.5 kW, 3-Phase, 400 V About
The Siemens SIMOTICS S-1FL2 series model 1FL2310-0AC11-0MB0 is a high-precision permanent-magnet synchronous servo motor engineered for advanced industrial motion control. Operating on a 400 V AC 3-phase supply grid, this motor outputs a rated power of 2.5 kW at a nominal speed of 2000 rpm. It features a 90 mm shaft height frame, a plain shaft built to Tolerance N, an integrated mechanical holding brake, an IP65 protection rating with an oil seal, and an AM21bit absolute encoder angular connector optimized for direct integration with SINAMICS S200 drive systems.