Siemens, SIMATIC ET 200SP, 6ES7193-6BP20-0BF0, N/A (I/O BaseUnit with AUX Terminals), 1-Phase, 24 V DC to 230 V AC (Universal System/Load Voltage)

Price 30000.0 INR/ Piece

Get a Price/Quote

MOQ : 1 Piece

Siemens, SIMATIC ET 200SP, 6ES7193-6BP20-0BF0, N/A (I/O BaseUnit with AUX Terminals), 1-Phase, 24 V DC to 230 V AC (Universal System/Load Voltage) Specification

Rated Voltage
230 Volt (V)

Input Current
Max 5 A load capacity limit per process terminal

Operating Temperature
Maximum Ambient Range up to +60 C Celsius (oC)

Protection Level
IP20 Protection Rating

Phase
Single-Phase (AC terminal operation) / DC

Output Voltage
24 Volt (V)

Humidity
95% maximum relative humidity (non-condensing)

Frequency
60 Hertz (HZ)

Efficiency
Features internal temperature compensation for measurements

Mounting Type
Directly clips onto 35 mm DIN Rail assembly

Usage
Control Cabinet / I/O Signal Termination

Condition
New

Size
2.0 cm x 11.7 cm x 3.5 cm (W x H x D)

Height
11.7 Centimeter (cm)

Function
Houses 8 process and 4 AUX terminals per single slot

Application
Connects fail-safe/standard modules needing AUX lines

Product Type
SIMATIC ET 200SP BaseUnit (BU Type F0)

Dimension (L*W*H)
3.5 cm x 2.0 cm x 11.7 cm Centimeter (cm)

Weight
0.048 Kilograms (kg)

Color
Industrial Gray / Siemens Standard

Length
3.5 Centimeter (cm)

Width
2.0 Centimeter (cm)

Voltage
24 Volt (v)

Power Consumption
10 Ampere

Accessories
Slide-in Equipment Labeling Plates, Shield units

Warranty
12 Months Standard Manufacturer Warranty

Siemens, SIMATIC ET 200SP, 6ES7193-6BP20-0BF0, N/A (I/O BaseUnit with AUX Terminals), 1-Phase, 24 V DC to 230 V AC (Universal System/Load Voltage) Trade Information

Minimum Order Quantity
1 Piece

Delivery Time
2 Week

Siemens, SIMATIC ET 200SP, 6ES7193-6BP20-0BF0, N/A (I/O BaseUnit with AUX Terminals), 1-Phase, 24 V DC to 230 V AC (Universal System/Load Voltage) About

This Siemens SIMATIC ET 200SP I/O termination BaseUnit, model number 6ES7193-6BP20-0BF0 (BU20-P8+A4+0B), is a specialized type F0 terminal block module designed to support distributed peripheral extension cards. Offering multi-voltage flexibility, it handles general operational power distributions up to 230 V AC or 24 V DC. It manages an internal power bus with a maximum current-carrying capacity of 10 A across both the main P1/P2 power lines and its 4 integrated auxiliary (AUX) terminals, supporting up to 5 A per process terminal line. Because it serves exclusively as a passive physical backplane connector and push-in routing terminal strip rather than an active motor drive, it carries no mechanical kW/HP power rating. The 20 mm wide housing features direct push-in process terminals and is configured to continue the potential group bridged from the left.

Tell us about your requirement