Siemens, SIMATIC ET 200SP, 6ES7193-6BP00-0BD0, N/A (I/O BaseUnit), 1-Phase, Up to 230 V AC / 120 V DC (System & Load)

Price 30000.0 INR/ Piece

Get a Price/Quote

MOQ : 1 Piece

Siemens, SIMATIC ET 200SP, 6ES7193-6BP00-0BD0, N/A (I/O BaseUnit), 1-Phase, Up to 230 V AC / 120 V DC (System & Load) Specification

Rated Voltage
230 Volt (V)

Mounting Type
Directly clips onto 35 mm DIN Rail assembly

Input Current
Max 5 A load capacity limit per process terminal

Protection Level
IP20 Protection Rating

Humidity
95% maximum relative humidity (non-condensing)

Efficiency
Isolation tested with ultra-safe 3,250 V DC parameters

Operating Temperature
Maximum Ambient Range up to +60 C Celsius (oC)

Phase
Single-Phase (AC operation) / DC

Frequency
60 Hertz (HZ)

Output Voltage
120V Volt (V)

Usage
Control Cabinet / Power Routing Distribution

Size
2.0 cm x 11.7 cm x 3.5 cm (W x H x D)

Condition
New

Height
11.7 Centimeter (cm)

Function
Houses 12 process terminals per individual slot

Product Type
SIMATIC ET 200SP BaseUnit (BU Type D0)

Application
Connects heavy load circuits or safe distribution blocks

Weight
0.047 Kilograms (kg)

Dimension (L*W*H)
3.5 cm x 2.0 cm x 11.7 cm Centimeter (cm)

Color
Industrial Gray / Siemens Standard

Width
2.0 Centimeter (cm)

Length
3.5 Centimeter (cm)

Voltage
230 Volt (v)

Accessories
Slide-in Equipment Labeling Plates, Shield units

Warranty
12 Months Standard Manufacturer Warranty

Siemens, SIMATIC ET 200SP, 6ES7193-6BP00-0BD0, N/A (I/O BaseUnit), 1-Phase, Up to 230 V AC / 120 V DC (System & Load) Trade Information

Minimum Order Quantity
1 Piece

Delivery Time
2 Week

Siemens, SIMATIC ET 200SP, 6ES7193-6BP00-0BD0, N/A (I/O BaseUnit), 1-Phase, Up to 230 V AC / 120 V DC (System & Load) About

This Siemens SIMATIC ET 200SP I/O termination BaseUnit, model number 6ES7193-6BP00-0BD0 (BU20-P12+A0+0B), is a type D0 terminal block module engineered to host decentralized peripheral expansion cards (typically specialized high-voltage AC or process modules). Operating on a standard 1-phase system setup, it supports up to 230 V AC or 120 V DC across its power distribution rails. Because it serves exclusively as a passive physical backplane connection point and push-in terminal strip rather than an active motor drive, it carries no mechanical kW/HP power rating. The 20 mm wide housing features 12 process terminals, operates without auxiliary (AUX) terminals, and is configured to continue the potential group bridged from the left.

Tell us about your requirement